Powered by built-in solar cell, the JEXONA ADF CIC-005-016 is equipped with dual arc sensors that activate the auto-darkening filter to switch from light to dark automatically in a 1/25000 second when an arc is struck. The auto-darkening filter greatly reduces the need to flip the welding helmet up and down between torch placements, which helps to boost productivity by reducing the stop-and-start time needed with passive lens welding helmets. This feature can also reduce the need for grinding and rework by increasing torch placement accuracy, thus saving time, effort and money. In event of electric failure or LCD failure, the welder remains protected against UV and IR radiation with double-layer LCD technology. It is suitable for most Stick, MIG (Metal Inert Gas) and TIG (Tungsten Inert Gas) applications. The ADF CIC-005-016 is the Beginner style and easy to operate.
Economically designed and made of lightweight corrosion resistant &fireproof materials, the ADF CIC-005-016 features a custom fit made possible by a ratcheting headband, padded interior and sweatband. Its filter has a wide viewing area of 3-1/2″x1-3/8″giving you a full view of your welding area and complete UV/IR protection.
The JEXONA ADF CIC-005-016 welding helmet is manufactured in conformance with international standards and it’s also covered by a 1-year manufacturer’s warranty.
Light state: DIN3
Dark state: DIN11
Switching time: 1/25000s
Delay time: NO
Sensitivity adjustment: NO
Battery: Solar Cell & Li battery
Minimum Lifetime: 6500 Welding Hours
Operation temperature: -10C ~60C
Viewing area: 90×35 mm (3-1/2″x1-3/8″)
Cartridge Size: 108×50.8×5 mm (4-1/4″x2″x1/5″)
UV transmittance: <0.0003%
IR transmittance: 780-1300nm<0.003% 1300-2000nm<0.009%
Material of helmet: Nylon, PA, ABS
Solar-powered welding helmet with auto-darkening filter switching from light to dark in 1/25000 s
Large viewing area of 3-1/2″x1-3/8″ and Minimum lifetime up to 6500 welding hours
Suitable for welding processes including Stick (arc welding), MIG (Metal Inert Gas), MAG (Metal Active Gas), TIG (Tungsten Inert Gas) and Plasma Cutting
In conformance with CE, ANSI Z87.1, CSA Z94.3, AS/NZS standards
The Beginner style. Easy to operate