-100% Brand New.
-Mask Material: PP
-Viewing Area:98 x 80 mm/3.86 x 3.15 inch
-Cartridge Size: 133 x 114 x 10mm/5.24 x 4.49 x 0.39 inch
-Light State: DIN4
-Dark State: Variable shade,DIN9~13
-Switching Time (Light to Dark): 1/25000 seconds (normal temperature conditions)
-The Turn Time(Dark to Light): 0.1~ 1.0S by dial control knob
-Sensitivity Control: Low to high, by infinitely dial knob
-Power Supply: Solar lithium cell. (Battery changes required 1X CR2450 lithium battery)
-Power On/Off: Fully Automatic
-UV/IR Protection: DIN16
-Arc Sensor: 4
-Low Amperage TIG: 5 amp
-Grinding Function: Yes
-Low Volume Alarm: Yes
-ADF self-check： Yes
-Operating Temperature: -5 °C ~ 55 °C (23 °F ~ 131 °F)
-Storage Temperature: -20 °C ~ 70 °C (-4 °F ~ 158 °F)
-Welding types: SMAW, MIG,TIG, GTAW, MAG/GO₂, SAW, PAC, PAW
-Powered by lithium and solar cell, the product can last for 5000 working hours and possesses 15 to 20 minutes auto off function.
– Photoelectric sensors technology, liquid crystal of high quality and spectrum filter provide welders a clear view of observation and effective protection.
-Light to full dark is 1/25000s so that eyes are protected from the harm of arc light.
-Light level of filter is DIN4 and the time from dark to bright state can set from 0.1s to 1.0s according to demand.
-The product can use normally under the temperature from -5 °C ~ 55 °C and can be applied to hand welding, gas protected welding, argon arc welding and plasma cutting.
-The design is light and balanced with adjustable headgear that wears comfortable and relieves fatigue
1x Quality blue welding helmet
1 x Users Instruction
Large 3.86″ x 3.15″ LCD viewing area, make the vision wider and clearer.
Powered by lithium and solar cell, the product can last for 5000 working hours and possesses 15 to 20 minutes auto off function.
You can replace the welding lens by hands without any screwdrivers to loose or tighten.And the headband can be adjusted manually to meet needs of different people.
The quality lens gives you the setting adjustment knobs can adjust shade No. from 9 to 13, sensitivity and delay time. Welding and grinding are also selective.
Gives you the compliance you’re looking for, since it meets the safety and technical standard of EN 379, ANSI Z87.1-2010 and GB/T3609.2-2009.